How to Download and Install Coalesced 30/45 FPS Mod for Mass Effect 2
If you are a fan of Mass Effect 2, you probably know that this game is designed to run at 60 frames per second (FPS) on most computers. However, if your computer is not powerful enough to handle this high FPS, you may experience lag, slow motion, or stuttering during gameplay. This can ruin your immersion and enjoyment of this epic sci-fi adventure.
Fortunately, there is a solution for this problem: a modification or a mod that changes the coalesced.ini file of Mass Effect 2 to enforce a lower FPS limit for the game, either 30 or 45, depending on your preference. This mod can make the game run faster and smoother on less powerful computers, but it will also reduce some visual quality and fluidity.
coalesced 30 45 fps rar download
Download File: https://tinurll.com/2vxPlY
In this article, we will show you how to download and install this mod for Mass Effect 2, as well as how to uninstall or restore it if you change your mind. Before we begin, please note that this mod is not officially supported by BioWare or Electronic Arts, and it may cause some issues or conflicts with other mods or DLCs. Use it at your own risk and always backup your files before making any changes.
Downloading the mod
The coalesced 30/45 FPS mod for Mass Effect 2 was created by Gambid from Mortal Kombat Secrets, who kindly shared it with other fans on their forum. You can download the mod files from there as either a rar file or as individual files.
A rar file is a compressed file format that reduces the size of data and makes it easier to download and share. To extract a rar file, you will need a special program like WinRAR or 7-Zip. You can download these programs from their official websites and install them on your computer.
If you prefer not to use a rar file, you can If you prefer not to use a rar file, you can download the individual files from the forum thread. You will need to download four files: coalesced_30fps.ini, coalesced_45fps.ini, ME2Coalesced.exe, and ME2FixChecksum.exe. These files are the core components of the mod and the tools needed to install it.
Once you have downloaded the rar file or the individual files, you can proceed to the next step: installing the mod.
Installing the mod
The installation process of the mod is relatively simple, but it requires some attention and care. You will need to backup your original coalesced.ini file, extract or copy the mod files to your Mass Effect 2 folder, and use a tool to fix the checksums of the modified coalesced.ini file. Here are the detailed instructions:
coalesced.ini mod for 30/45 fps in Mortal Kombat 9
how to fix slow motion issue in MK9 with coalesced files
download coalesced tools for MK9 to edit game speed and fps
MK9 coalesced extractor and packer by Haoose v1.0
change language of MK9 with coalesced localization files
MK9 30/45 fps mod.zip download link
MK9 coalesced.ini tweaks and tips
how to make MK9 run faster and smoother with coalesced mods
MK9 coalesced.ini backup and restore guide
best coalesced settings for MK9 on low-end PC
MK9 coalesced.ini cheat codes and secrets
how to play MK9 online with coalesced mods
MK9 coalesced.ini editor and creator
how to install coalesced mods for MK9 on Steam
MK9 coalesced.ini comparison and benchmark
MK9 coalesced.ini custom resolution and graphics options
how to unlock all characters and costumes in MK9 with coalesced mods
MK9 coalesced.ini error and crash fix
how to enable 60 fps in MK9 cutscenes with coalesced mods
MK9 coalesced.ini FAQ and troubleshooting
how to improve MK9 performance and quality with coalesced mods
MK9 coalesced.ini hacks and tricks
how to change MK9 controls and keybindings with coalesced mods
MK9 coalesced.ini latest version and update
how to mod MK9 characters and skins with coalesced files
MK9 coalesced.ini optimization and enhancement guide
how to remove MK9 intro videos and logos with coalesced mods
MK9 coalesced.ini review and rating
how to switch between 30/45/60 fps in MK9 with coalesced mods
MK9 coalesced.ini tutorial and walkthrough
Backup your original coalesced.ini file. This file is located in your Mass Effect 2 folder, under \BioGame\Config\PC\Cooked\. You can copy and paste this file to another location, such as your desktop or a USB drive, for safekeeping. This way, you can restore it later if you want to uninstall or revert the mod.
Extract or copy the mod files to your Mass Effect 2 folder. If you downloaded the rar file, you will need to use WinRAR or 7-Zip to extract it. Right-click on the rar file and choose "Extract here" or "Extract to coalesced_30_45_fps_rar\". This will create a folder with the same name as the rar file, containing the four files mentioned above. Copy and paste these files to your Mass Effect 2 folder, under \BioGame\Config\PC\Cooked\. If you downloaded the individual files, you can simply copy and paste them to the same location.
Use a tool to fix the checksums of the modified coalesced.ini file. The checksum is a value that verifies the integrity of a file. If you modify a file, such as coalesced.ini, its checksum will change and cause an error when launching the game. To prevent this, you will need to use a tool called ME2FixChecksum.exe, which is included in the mod files. This tool will automatically fix the checksums of any coalesced.ini file in your Mass Effect 2 folder. To use it, simply double-click on it and wait for it to finish. You should see a message saying "Done!" when it is done.
Congratulations! You have successfully installed the coalesced 30/45 FPS mod for Mass Effect 2. Now you can launch the game and test if it works as intended.
Testing the mod
To test if the mod works as intended, you will need to launch Mass Effect 2 and check your FPS during gameplay. You can use a program like FRAPS or MSI Afterburner to display your FPS on screen. Alternatively, you can use the console command "stat fps" in-game to show your FPS in the upper right corner of your screen.
If you installed the coalesced_30fps.ini file, you should see your FPS capped at 30. If you installed the coalesced_45fps.ini file, you should see your FPS capped at 45. If you see any other value, such as 60 or higher, it means that the mod did not work properly and you may need to reinstall it or check for any errors or conflicts.
If the mod works as intended, you should notice that your game runs faster and smoother than before, especially if your computer was struggling to run it at 60 FPS. However, you may also notice that your game looks less smooth and fluid than before, as lower FPS means less motion blur and less responsiveness. This is a trade-off that you will have to accept if you want to use this mod.
If you encounter any problems or issues with using this mod, such as crashes, glitches, or compatibility issues with other mods or DLCs, you may want to uninstall or restore it and look for other solutions. In the next section, we will show you how to do that.
How to Uninstall or Restore Coalesced 30/45 FPS Mod for Mass Effect 2
If you want to uninstall or restore this mod for any reason, such as wanting to play at 60 FPS again or experiencing problems with using it, you will need to remove or revert If you want to uninstall or restore this mod for any reason, such as wanting to play at 60 FPS again or experiencing problems with using it, you will need to remove or revert the mod files and restore the original coalesced.ini file. Here are the detailed instructions:
Remove or revert the mod files. To do this, you will need to delete or rename the coalesced_30fps.ini or coalesced_45fps.ini file from your Mass Effect 2 folder, under \BioGame\Config\PC\Cooked\. You can also delete or rename the ME2FixChecksum.exe file, as you will not need it anymore.
Restore the original coalesced.ini file. To do this, you will need to copy and paste the backup file that you created before installing the mod, from your desktop or USB drive, to your Mass Effect 2 folder, under \BioGame\Config\PC\Cooked\. You should overwrite the existing coalesced.ini file with the backup file.
Congratulations! You have successfully uninstalled or restored the coalesced 30/45 FPS mod for Mass Effect 2. Now you can launch the game and enjoy it at its default 60 FPS setting.
Conclusion
In this article, we have shown you how to download and install the coalesced 30/45 FPS mod for Mass Effect 2, as well as how to uninstall or restore it. This mod is a useful and simple way to improve the performance and smoothness of Mass Effect 2 on less powerful computers, by lowering the FPS limit from 60 to 30 or 45. However, this mod also has some drawbacks, such as reducing the visual quality and fluidity of the game, and potentially causing some issues or conflicts with other mods or DLCs.
Ultimately, whether you want to use this mod or not is up to you and your personal preference. Some people may prefer to sacrifice some graphics for better gameplay, while others may prefer to keep the game as it was intended by the developers. There is no right or wrong answer here, only different opinions and experiences.
We hope that this article has been helpful and informative for you. If you have any questions, comments, or feedback, please feel free to share them with us in the comment section below. We would love to hear from you and learn from your perspective.
Frequently Asked Questions
Here are some of the most common questions that people ask about the coalesced 30/45 FPS mod for Mass Effect 2:
What is coalesced.ini?
Coalesced.ini is a configuration file that is used by Mass Effect 2 to store various game settings and parameters, such as graphics, audio, controls, gameplay, etc. It is located in your Mass Effect 2 folder, under \BioGame\Config\PC\Cooked\.
What is FPS?
FPS stands for frames per second, which is a measure of how smoothly a game runs on a computer. The higher the FPS, the smoother and more responsive the game is. The lower the FPS, the more laggy and choppy the game is. The default FPS limit for Mass Effect 2 is 60.
What is a rar file?
A rar file is a compressed file format that reduces the size of data and makes it easier to download and share. To extract a rar file, you will need a special program like WinRAR or 7-Zip.
What is a checksum?
A checksum is a value that verifies the integrity of a file. If you modify a file, such as coalesced.ini, its checksum will change and cause an error when launching the game. To prevent this, you will need to use a tool like ME2FixChecksum.exe to fix the checksums of any modified coalesced.ini file.
What are some alternatives to using this mod?
If you do not want to use this mod or if it does not work for you, there are some other ways to improve the performance and smoothness of Mass Effect 2 on less powerful computers. Some of them are:
Lowering your graphics settings in-game or in your graphics card control panel.
Closing any unnecessary programs or background processes that may be using your CPU or RAM.
Updating your drivers and software to their latest versions.
Cleaning your computer from dust and dirt that may be affecting its cooling system.
Upgrading your hardware components if possible and affordable.
44f88ac181
Commentaires